Typically, a gear is a circular disk with teeth, which locks with other teeth to transmit motion, influencing speed, force or direction.
Answers to common questions about ordering from RAR Gears.
Typically, a gear is a circular disk with teeth, which locks with other teeth to transmit motion, influencing speed, force or direction.
When the teeth of one gear engage with another, rotational motion is transferred from the driving gear to the driven gear. The resulting speed, direction and torque depend on the size and shape of each gear.
The gear ratio is the relationship between the number of teeth on two meshing gears. It determines how speed and torque are changed during transmission.
Gear ratios allow machines to:
Increase torque
Increase speed
Change rotational direction
Improve efficiency for specific task
Spur gears
Screw gears (crossed helical gears)
Bevel gears
Miter gears
Worm gears
Rack and pinion gears
Spur gears have straight teeth, a simple design and are typically lower cost. On the other hand, Helical gears have angled teeth, offer smoother and quieter operation and are better for high-speed applications.
A worm gear is a thread cut into a round bar, and a worm wheel is a gear that meshes with the worm at a shaft angle of 90 degrees.
Bevel gears transmit power between shafts that intersect, commonly at 90 degrees.
KHK gears come in the following materials:
Alloy Steel
Carbon Steel
Stainless steel
Aluminium bronze
Brass
Cast bronze
Nylon
Acetal
Cast iron
Common causes include:
Insufficient lubrication
Overloading
Misalignment
Contamination
Poor manufacturing quality
Lubrication reduces friction, minimises wear, lowers operating temperatures and extends gear life.
Cars
Bicycles
Industrial machinery
Medical devices
Food processing machines
Household appliances
Robotics
Clock
Noise may result from:
Worn teeth
Poor lubrication
Misalignment
Excessive speed
Manufacturing defects
Selecting the right gear depends on several factors, but the most important consideration is ensuring the gear is strong enough to handle the load and operating conditions of the application.
The first step is to understand your application requirements. Consider factors such as the weight being moved, the required speed of movement, and the operating conditions. These details will help determine the torque and load that the gear system must transmit.
When gears operate as a pair, the pinion (the smaller gear) is typically subjected to greater stress than the larger mating gear. For this reason, gear selection is often based on the strength and performance requirements of the pinion.
Two key aspects of gear strength should always be considered:
Bending Strength: The ability of the gear teeth to resist cracking or breaking under load.
Surface Durability: The ability of the tooth surface to resist wear, pitting, and fatigue over time.
To achieve reliable performance and long service life, the selected gears should have both bending strength and surface durability ratings that exceed the calculated operating load.
If you're unsure which gear is best suited to your application, the RAR Gear team can help you identify the most appropriate solution based on your load, speed, and operating requirements.
When selecting gears for a new or existing application, there are generally two options:
Standard gears – off-the-shelf products that have been designed, tested, and manufactured for a wide range of common applications (available online at RARGears.com).
Custom gears – gears that are specifically designed and manufactured to meet unique application requirements.
Where a standard gear meets the required specifications, it is usually the most cost-effective and quickest solution. Standard gears are readily available, require no additional design work, and have a proven track record in a wide variety of industrial applications.
However, custom gears may be required when standard products cannot fully meet the needs of the application. Custom gears are often the best choice in the following situations:
A specific gear ratio is required and no standard gear combination provides the correct number of teeth or performance characteristics.
Higher load capacity or strength is needed than can be achieved with standard gear options.
Special materials or heat treatments are required to meet demanding environmental or operational conditions.
Non-standard dimensions are needed, such as a unique bore size, outside diameter, face width, hub configuration, or mounting arrangement.
Space constraints or design limitations require a gear that has been tailored to fit a specific assembly.
At R. A. Rodriguez, we can supply both standard and bespoke gearing solutions to meet your exact application requirements. If an off-the-shelf gear is not suitable, our engineering team can help develop a custom gear solution designed around your performance, dimensional, and material specifications.
Learn more about our custom gear capabilities: https://www.rarukautomation.com/custom-gears/
Yes, free shipping is available on all orders over £100 in England, Scotland and Wales, and over £200 in all other territories we ship to. Read our full delivery policy here.
UK mainland customers can choose from:
Standard delivery: £4.95
Next day courier: £10.00
Free shipping is available on orders over £100.00.
Yes. Customers in the UK (excluding Northern Ireland) can select next day courier delivery for £10.00, subject to stock availability and order cut-off times.
Yes. Customers in the UK, Northern Ireland, and Europe can arrange collection using their own courier.
For all European delivery zones, orders of £200.00 or more qualify for free shipping.
Yes. Delivery charges vary depending on your delivery zone. Express and standard delivery options are available for most European destinations.
You can check your country's delivery zone in our delivery policy. If you're unsure, contact our team and we'll be happy to confirm the delivery options and pricing available for your location.
Yes, R.A. Rodriguez (UK) Ltd has achieved ISO 9001:2015 certification.
Speed: you can check prices, availability and technical information instantly.
You can browse 24/7 and place orders outside of our business opening hours.
We offer a secure payment system.
Use our comparison tool to quickly compare gears.
Re-order the gears you need with the click of a button.
Belgium
Bulgaria
Croatia,
Czech Republic
Estonia
Finland
France,
Greece
Hungary
Iceland
Latvia
Lithuania
Luxembourg
Republic of Ireland
Romania
Slovakia
Slovenia
United Kingdom
KHK Gears are also available in Austria, Denmark, Germany, Italy, the Netherlands, Norway, Poland, Portugal, Spain and Sweden through our network of distribution partners. Please contact us for more information.
If your query was not covered by the FAQs above, please contact us at info@raruk.com.